6
Getting Started
Note: Conduit can be threaded through either side of the test
chamber.
Perform the following steps to get your system ready to use:
1.
Unpack the Optima Package Test Fixture and the Optima vT Leak Tester.
2.
Turn the QUALIPAK-770 upside-down and place on a sturdy workbench. Then
remove the fixture’s bracket by unscrewing its 2 screws. See Figures 2 & 3.
3.
Connect the vacuum connector to the vacuum connector inlet. See Figures 2 & 3.
4.
Load cell plugs left and right. See Figures 2 & 3.
5.
Reassemble bracket.
Figure 2:
Package Tester Connections
