background image

10

11

USM Haller lock C
Instruction manual

Date
05.22/en

Follow the steps below to start up a lock.

Designate a Power User and his/her proxy.

The Power User is responsible for the following tasks:

— Starting up the locks

— Managing and maintaining the locks 

— Briefing the lock C users

— Managing the product accessories

 

 Take extra care when carrying out these steps. If you 

start up the lock correctly, you will have no problems 

using your lock C.

Step 1 —

initiating lock C

Make sure that the indication slot on the front of the lock 

is vertical.

Remove the separator strip by pulling on it. Lock C start-up 

begins.

Flashing signal: 3 × green  

Step 2 —

programming the Main Admin card

Take the Main Admin card (red) and hold it briefly in front 

of the lock.

Flashing signal: 1 × green, 1 × red  

Briefly hold the card in front of the lock again to confirm this.

Flashing signal: 1 × green, 1 × red  

 

 The Main Admin card is now programmed. You are 

now the lock owner.

3 Start-up

Step 3 —

programming the Admin cards

Pick up the Main Admin card (red) and the Admin cards to 

be programmed (grey). 

1.  Hold the Main Admin card on the lock.

Flashing signal: 1 × green, 1 × red  

2.  Now hold all of the Admin cards to be programmed on 

the lock, one after the other.

Flashing signal per card: 1 × green, 1 × red  

3.  Afterwards, hold the Main Admin card on the lock 

once again.

Flashing signal: 1 × green 

 

 The same process can also be carried out with 

just one Admin card.

Step 4 —

check if start-up worked

Hold the supplied key card in front of the lock. The lock is 

now locked.

Flashing signal: 1 × green 

Hold the key card in front of the lock again to unlock it.

Flashing signal: 1 × green  

Now turn the lock handle 90° clockwise to open the locker.

 

 The Admin cards are now programmed.

 

 Carry out the same start-up procedure for all locks.

Once the locks have been started up, they will be 
in “Public Locker mode” and can be operated in 
principle using key cards or smartphones.
However, we recommend installing the USM app in 
advance and using this to manage the locks.

   Management with the USM app p. 12

Main Admin

Main Admin

Main Admin

Admin

User

1.

2.

3.

Summary of Contents for Haller

















Reviews: