USM Haller Instruction Manual Download Page 13

24

25

USM Haller lock C
Instruction manual

Date
05.22/en

8.3  Operating lock C

Locking lock C*

1.  Hold your key card or your smartphone (with the app open) 

in the middle of the lock C that you wish to lock.

Flashing signal: 1 × green  

2.  Turn the lock handle 90° counterclockwise so that the slot 

is in vertical position and the bolt inside moves upwards.

3. The lock is now locked.

*  If the “Auto Close” function is activated, end users only 

need to hold their smartphone on the lock to open the 

locker. To close it, end users simply turn the lock handle 90° 

counterclockwise without needing to use the smartphone 

again. The lock locks automatically after 4 seconds.

This function is enabled by the Power User and is available 

in both “Personal Locker mode” and “Shared Locker mode”.

Opening lock C

1.  Hold your key card or your smartphone (with the app open) 

in the middle of the lock C that you wish to open.

Flashing signal: 1 × green  

(if the “Auto Close” function is activated)

Flashing signal: 2 × green 

(1 × green, 

after 4 sec. 1 × green)

2.  Turn the lock handle 90° clockwise so that the slot is in 

horizontal position and the bolt is retracted.

3. The lock is now open.

 

 The lock can only be opened with the same key card 

or smartphone that it was locked with (except in 

“Shared Locker mode”).

 

 All locks can be opened by the Power User in an 

emergency.

8.4  Naming lock C

You have the option of naming your lock or chang-
ing the names of your locks.
This can help you to find your way around and 
locate your locks; it is also helpful when managing 
several locks. You can choose the names as you 
wish.

Examples:

—  Describe the location:

row 2 locker 3, top-left locker, lock 5 in green unit

—  Describe the type of use:

private, office, XY group project, team locker

Naming lock C

1.  Go to the home screen in the relevant mode, i.e. “Public 

Locker”, “Personal Locker” or “Shared Locker” mode.

2.  Select the desired lock C by tapping on the relevant tile.

3.  Press “Rename” and change the name.

4.  Then tap on “Save” to save the new name.

Home

Public Locker

Personal Locker

Logout

1.

3.

2.

Home

Public Locker

Personal Locker

Logout

1.

3.

2.

Summary of Contents for Haller

















Reviews: