Usl JSD-100, Manuals

Page: 51 / 68

Page 51
Full Range
Audio Channel Biamp Audio
Channel Triamp Audio
Channel Phoenix Main Output Pins
(+, -, shield) DB25M Monitor 1 Output
Pins (+, -, shield)
Left Left Low Left Low 1, 2, 3 2, 14, 1
Center Center Low Center Low 4, 5, 3 5, 17, 4
Right Right Low Right Low 6, 7, 8 8, 20, 7
LFE LFE1 LFE1 9, 10, 8 25, 12, 13
Ls Ls Ls 11, 12, 13 23, 10, 22
Rs Rs Rs 14, 15, 13 24, 11, 9
Lrs/Lc (Lc only
in 13.1)
Lc Low Lc Low 16, 17, 18 16, 3, 15
Rrs/Rc (Rc only
in 13.1)
Rc Low Rc Low 19, 20, 18 19, 6, 18
Full Range
Audio Channel Biamp Audio
Channel Triamp Audio
Channel Phoenix Optional Output
Pins (+, -, shield) DB25M Monitor 2 Output Pins
(+, -, shield)
LFE2 Left High Left High 1, 2, 3 2, 14, 1
OUT 9 Lc High Left Mid 4, 5, 3 16, 3, 15
OUT 13 Unused Center Mid 6, 7, 8 25, 12, 13
OUT 14 Center High Center High 9, 10, 8 5, 17, 4
OUT 10 Rc High Right Mid 11, 12, 13 19, 6, 18
LFE3 Right High Right High 14, 15, 13 8, 20, 7
Lrs Lrs Lrs 16, 17, 18 23, 10, 22
Rrs Rrs Rrs 19, 20, 18 24, 11, 9
AES Output Module
AES output modules are available with up to 32 output channels (16 AES pairs) on four RJ45 connectors. The first
two connectors (identified as CH 1-8 and CH 9-16) are used for full range 5.1, 7.1DS, and 7.1SDDS speaker
configurations. These two connectors also handle biamp and triamp 5.1 and 7.1DS. The last two RJ45 outputs are
used for additional speaker configurations. The tables below identify which audio channels are available on which
AES pair of which RJ45 connector. In the tables below, cable pairs are identified by CableNumber-PairNumber.
Cable 1 plugs into the jack identified as CH 1-8. Cable 4 plugs into the jack marked CH 25-32. Note that not every
cable is used in every configuration. The cable pairs go to the connector pins identified in the table below.
Cable Pair RJ-45 Pins ( +, - )
1 1, 2
2 3, 6
3 4, 5
4 7, 8