Page
22
of
26
System Information Commands
hsw.sys.board.revision
Query Only
String
Returns current HSW-‐602 hardware revision
version.
hsw.sys.board.tempurature Query Only
Float
Current board temperature in degress Celsius.
hsw.sys.sw.version
Query Only
String
Returns the current HSW-‐602 software revision
version.
Network Configuration Commands
hsw.sys.ip.dhcp
Yes
0 or 1
Enable or disable use of Dynamic Host
Configuration Protocol. When enabled, if no
DHCP server is found within 5 seconds of boot an
IPV4 link local address will be assigned.
hsw.sys.ip.address
Yes
IP String Assign or Query the static IPv4 address to be used
when DHCP is disabled.
hsw.sys.ip.subnet
Yes
IP String Assign or Query the IPv4 subnet mast to be used
when DHCP is disabled.
hsw.sys.ip.gateway
Yes
IP String Assign or Query the IPv4 default gateway to be
used when DHCP is disabled.
Projector Configuration Commands
hsw.sys.projector.enable
Yes
0 or 1
Enable or disable digital cinema projector
communication.
hsw.sys.projector.address
Yes
IP String Assign or query the IPv4 address of the projector
the HSW-‐602 will communicate with.
hsw.sys.projector.duration Yes
Integer
Number of seconds the HSW-‐602 will blank the
projector output during a Live output channel
switch.
hsw.sys.projector.blank
Yes
0 or 1
Manual send the command to blank the projector
output.
0 – Disable blanking (show image).
1 – Enable blanking (mute image).
