- 8 -
Power entry Module –
Accepts IEC type of line cord from power 100-240V
AC source.
Also contains a 300mA
Slo-
Blo 5x20mm fuse.
Analog 2 Channel Output – Balanced analog output of
AES Channels 7 and 8. Output level nominal 300mV
, 600V
Digital Input – 8 channels of
AES balanced line input. Channels 1-6 are routed through the unit to the
Analog Out-
put
(item #1
1). Both DCI and DMA8 connector formats are supported. Channels 7 and 8 are routed to
Analog 2
Channel Output (item #2).
USB Port – For communication with the user interface.
*
Ethernet Port – For communication with the User Interface.
*
T
oslink Port – Optical Fiber input for SPDIF (PCM) or
AC3 signals.
Coax 1 Port – RCA
type Connector for SPDIF (PCM) or
AC3 signals.
RS-232 Port – For communication with the User Interface.
*
Remote Start/Stop –
A
manual control port for selecting Film or Digital Mode.
Cinema Processor
Automation Port –
A
bi-directional port for receiving and sending automation pulses between the
Cinema Processor and the ECI.
Digital Player
Automation Port –
A
bi-directional port for receiving and sending automation pulses between the Ex-
ternal Digital Player and the ECI.
Analog Output – Sends balanced line audio outputs to the Cinema Processor
.
Analog Bypass Input – Receives balanced line inputs from the external Digital Player
.
Analog Input 2 Channel - Receives balanced line signals for the 2 Channel
Analog Inputs;
Analog Input 6 Channel Receives balanced line signals for the 6 channel
Analog Inputs.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
*
Either connector may be used to connect. Only one can be active at a time.
