- 7 -
Signal presence indicators – Indicates when signals are greater than -30dB.
2 Channel
Analog Indicator – Balanced line input.
The 2 inputs are fed to a Pro Logic II decoder which produces a
6 channel output.
6 Channel
Analog Indicator – Balanced line input.
All channels (L, C, R, SW
, Ls, Rs) are processed through the
unit.
8 Channel Digital Indicator –
AES Balanced line input.
The standard 6 channels are processed through the unit.
T
w
o spare channels have independent balanced line outputs for use as needed.
T
oslink Indicator –
An optical fiber connection for SPDIF (PCM) or
AC3 signals.
T
wo channel PCM is decoded by
the Pro Logic II into 6 channels.
COAX 1 Indicator – Rear Panel RCA
type connector for SPDIF (PCM) or
AC3 signals.
T
wo channel PCM is decoded
by the Pro Logic II into 6 channels.
COAX 2 Indicator – Front Panel RCA
type connector for SPDIF (PCM) or
AC3 signals.
T
wo channel PCM is de-
coded by the Pro Logic II into 6 channels.
COAX 2 Input – RCA
type connector for SPDIF (PCM) or
AC3 signals.
Input Select switch (Front Panel) – Steps through the Input choices.
Film Mode Indicator – Lights when the unit is in Film (Bypass) Mode. Signals from
Analog Bypass Input pass directly
through the unit.
Digital Mode Indicator – Lights when the unit is in the Digital Mode. Signals from the selected digital input (item #9)
are processed through the unit.
Mode switch – Selects between Film or Digital Modes.
Power Indicator – Lights when unit is powered on.
Power Switch –
Applies power to the unit.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
