Operating Manual
11
www.ushio.com
Settings Menu
This menu shows the current settings. Each of these green boxes is a button that
the user can press to edit that setting.
The On Time shows how long an LED will be turned on for after pressing the Start
button or a pedal. Press this to go to the
Time Menu
.
The second button describes either the Current or the Intensity (depending on the
user’s settings). Press this to go to the
Intensity Menu
.
The button labeled “Calibration” goes to the
Calibration Menu
, where the user can
calibrate their device.
The fourth button goes to the
Control Mode Menu
. There the user can select what
method is used to set the duration of the output.
The button labeled “Password” goes to the
Password Menu
, where the user can
enable a password lock onto the device’s settings.
The fifth button returns to the
Operator Menu
.
