background image

4

• 

WARNING: 

in order to avoid overheating, do not cover the heater.

•  The appliance is not intended for use by children or infirm persons without 

supervision!

•  Young children should be supervised to ensure that they do not play with the 

appliance!

• 

Attention!

 To avoid any danger due to unintentionally resetting the thermal 

cut-out, the appliance must not be supplied via a timer.

•  Disconnect from mains when not in use or cleaning.
•  It is not recommended to use an extension cord.
•  Do not locate the heater immediately below a socket-outlet.
•  When  the  heater  is  turned  on  for  the  first  time,  it  may  release  a  slight, 

harmless odor. This odor is a normal occurrence caused by the initial heating 
of the internal heating elements and should not occur again.

pRoDucT FEATuREs

•  Ultra Slim  Fan Heater 
•  LED Display & Touch Panel
•  PTC Heating Element  For Extra Safety and Power Saving 
•  Triple Safety Protection- Thermal Cut Out / Fuse & Inbuilt Tip Over Switch
•  Shock Proof Fire Retardent Body
•  Two Heating Positions
•  Two Temperature Settings for Energy Saving Options 
•  Timer Setting Options : 1-12 hours
•  Temperature setting Option : 15-35˚C
•  With Remote  control 
•  Oscillation  function
•  Two Metre Long Power Cord
•  ISI Mark

AssEMBlY INsTRucTIoN

•  Open the packing, remove the unit and unscrew to open the base locknut.

Summary of Contents for TFH LED













Reviews: