usha TFH LED, Instruction Manual

Page: 7 / 12

7
During this 5 second interval changes can be inputted by pressing the “+” or “-”
keys.
However if after pressing the set key “ ” no further buttons are pressed the
unit will return to display the room temperature and to make further changes the
process needs to begin again.
A: Setting the timer:
Press the key, the light will show “0 H”, then press the “+” or “-”keys to set the
working time, (within a range of 1-12 hours).
The time can increase or decrease in intervals of 1 hour/each by pressing the “+”
or “-” keys. The display will show the final time you have set.
B: Setting the thermostat:
When the timer has been set (if desired), press the “ ” again. The LED displays
25˚C, now you can adjust the thermostat to your required temperature setting.
The temperature setting is increased or decreased in intervals of 1˚C/each press
of the “+” or “-” keys. The display will show the final temperature you have set.
Range 15 - 35˚C)
When the room temperature is < -10˚C, the LED display will show as “LO”
When the room temperature is > 40˚C, the LED display will show as “HI”.
When the room temperature is between -10˚C to 40˚C, then the LED display will
show the corresponding temperature by number.
REMoTE coNTRol
(Picture 1)
(Picture 2)