SMART SLEEP
Press [SMART SLEEP] button to on /off the smart sleep function.
When smart sleep is on, the fan speed will decrease by 1 step after
each 2 hrs until it does not reach to minimum speed. This function will
work only when fan is running above minimum speed. There is a
green LED to indicate that function is activate or not.
JUST FOR YOU
Press [JUST FOR YOU] button to activate a combination of fan speed,
pump and swing settings. There are 3 combinations (P1, P2 & P3)
that can be set as per your desire and also can be stored. To set a
new combination, press JFU key. The display will show ‘P1’ on first
press ‘P2’ on second and ‘P3’ on third and red LED will glow solid to
indicate that function is activated. There are some factory settings
which are stored initially will be applied when JFU key is pressed. Now
to set a new combination you want to store/Edit on any program no
i.e. P1, P2 or P3, follow following steps:
1. Set program number.
2. Set your desired combination of fan speed, pump and
swing.(That time the LED will start blinking. It means that now
you can store this setting).
3. Long press JFU key to store the same. A long beep will confirm
that your setting has been saved.
Note:
If you don’t press the JFU key when LED is blinking, the new
settings will not be saved. The function will be deactivated after 1 min
automatically.
USE & OPERATION
13
12
FAN SPEED
Press the FAN SPEED button repeatedly to change the speed
between 1 - 2- 3. The indicator light will show the selected speed:.
3 (HIGH)
—
2 (MED)
—
1 (LOW)
There is an increase /decrease button on remote to change the fan
speed
TIMER
Press the TIMER button until the desired time duration setting is
selected. When the set time has passed, the unit will automatically
turn off (unit remains in Standby mode until power cord is unplugged
from electrical socket). The TIMER function allows you to program the
unit for up to 8 hours of use.
LOW WATER ALARM
The unit is equipped with a low water sensor. In cool Mode, when
water in the tank is below the minimum level, you will hear a beeping
sound and the indicator light will glow solid continuously and the pump
will be off automatically .
First switch OFF the unit and unplug from the power outlet. Fill the
water tank with water above the minimum water level mark. Plug in
and switch ON again.
To deactivate the alarm and continue using the unit as a fan (without
evaporative cooling), Press the Alarm key. The Low Water Alarm will
not activate in Fan only mode. The Low Water Alarm will beep again if
the COOL function is activated while the water tank is still empty. The
water empty LED above alarm switch will glow continuously in
absence of water.
CHILD LOCK
Long press [Child Lock] button to on/off the function. When child lock
is on, no key will work either on panel or remote instead of child lock
key. There is a green LED to indicate that function is activate or not.
USE & OPERATION
Summary of Contents for AIR KING
Page 12: ......
