READ AND SAVE THESE INSTRUCTIONS:
When using electrical appliances, basic safety
precautions should always be followed:
• Your cooler runs on 230 Volt AC, 50 Hz. Check the
household voltage to ensure it matches the
appliance’s rated specification.
• Before operating the product remove it from its
packaging and check that it is in good condition.
• DO NOT operate any product with a damaged cord
or plug. We recommend not using an extension
cord with this appliance.
• DO NOT run power cord under carpeting, or cover
it with rugs or runners. Keep the cord away from
areas where it may be tripped over.
• Always unplug the product before refilling the water
tank.
• Always unplug the appliance from the power source
before cleaning, servicing or relocating the unit.
• Remove the power cord from the electrical
receptacle by grasping and pulling on the power
cord plug-end only, never pull the cord.
USER TIPS
Room with open windows & door
(RECOMMENDED)
Room with closed windows &
door ( NOT-RECOMMENDED)
STOCK HAZARD
230 Volt AC 50 Hz
WATER LEVEL INDICATOR
The recommended maximum relative humidity
level is 60% or less, which allows a noticeable
temperature decrease. The temperature
decrease will be greater in drier climates
because higher evaporation occurs when the
humidity is low.
The evaporative air cooler should not be used
in enclosed spaces. It must be kept level and
there must be water in the water tank. The
room should have doors and windows opened
to allow free air flow. The evaporative air
cooler works best when placed near an open
window, so that outside air is drawn into the
evaporative air cooler, the air circulates in the
room, then exits via the door. The maximum
cooling effect is felt when a person is in the
flow of air coming out of the evaporative air
cooler.
NOTE
When the product is used for the first time the
Honeycomb cooling media will have an odor
which will dissipate in a week or so of initial
use
• DO NOT use the product in areas where gasoline, paint or other flammable
goods and objects are stored.
• When using the ‘’COOL’’ setting, check the water tank to ensure that it is full.
Operation of this cooler on the ‘’COOL’‘ setting with an empty tank may result in
damage to the water pump.
• DO NOT attempt to repair or adjust any electrical or mechanical functions of the
cooler, as this may void the warranty.
7
6
Summary of Contents for AIR KING
Page 12: ......
