Operation and Function
03/19
Fl Set XL
22
8
Operation and Function
8.1
Operating conditions
8.1.1
normal operation
Fl works permanently and automatically during
normal operation and separates the consumer from the
supplier in the event of a fault by means of a solenoid
diaphragm valve.
The Fl operating status can be seen via the device
illuminated edge (9) (see chapter 8.2 "Status display") and the flow
duration display (10).
If the Fl interrupts the water supply during normal
operation, an error identification is possible via the status display.
8.1.2
Restarting the system
Briefly press the Set / Reset button (8).
or
Unplug the AC adapter (1) from the wall outlet or disconnect the
power supply.
wait ten seconds
Restore power supply
