Operation and Function
03/19
Fl Set XL
24
8.1.5
Test mode
In test mode, the correct function and sensitivity of the
system can also be checked (see also chapter 7.2).
If the status display shows a leakage, you can also check the
current tightness of your installation in this operating state.
Shut down all water outlets!
Keep the Set / Reset button (8) pressed (max. 10 sec.) until the
status indicator flashes green/yellow and the Check indicator
flashes yellow. The system is now in test mode.
Observe whether the status display shows the green/yellow
Flashing (after max. 5 minutes) then green.
WARNING
If the status display is not green, there is a fault!
Please proceed as described in chapter 9.2.2.
