Operation and function
05/20
Fl Detect RF Set
12
6
Operation and function
6.1
Operating states
6.1.1
Normal operation
An operation is not necessary.
If a wireless water detector detects conductive drinking water,
Fl shuts off the system and alarms acoustically.
6.1.2
Restarting the system
An alarm reset can only be done via the connected Fl or
its supply voltage.
A further prerequisite for this is that all water detectors are dry again
and the splinter has not become wet!
6.1.3
Battery pre-alarm
The detector emits a short beep if the battery voltage is
too low.
This is quieter than the watermessage and indicates
battery exhaustion.
The battery must be replaced for proper operation.
