USCutter GS-206M, Operation Manual

Page: 8 / 19

8
5.Printing And Pressing
5.3 Adjust suitable pressure by turning
pressure knob.Then close handle to start
transfer printing process.
5.1 Once heater reaches start
temperature,put mugs inside of mug heater
5.1
5.1
Remark:
1. Station 1/2 must work with two mugs inside together, working only with 1 mug inside will
damage the machine.
2. Station 3/4 must work with two mugs inside together, working only with 1 mug inside will
damage the machine.
3. Each heater
’s temperature is separately controlled by different triac, can be calibrated
separately. But we do not suggest customer make calibration unless there is a need.
5.3 Once printing process is over, buzzer
will alarm and open the handle then take
out mugs out of machine.
5.3
5.2 for 11oz mug,use front plate for position,
For 15oz mug,use two magnetic washer for
position which can help handle in middle
during printing process.
5.3