Overview of Your Heat Press
1. Pressure Adjustment Knob
2. Time/Temperature Control
3. Open/Close Control Arm
4. Top Platen
5. Bottom Platen
6. Reset button/Breaker switch
7. Power cord
8. On/Off Switch
The
Pressure Adjustment Knob
controls the amount of force that will be used to push the
transferred image into the fibers of the garment. Clockwise increases pressure. Counter
clockwise decreases it.
The
Time/Temperature Control Panel
on the left upper face of the casing is where you will
set heat and time requirements of your project. These will vary depending on the vinyl or
transfer paper used.
The
Control Arm
opens & closes the
top & bottom Heated Platens
of the clamshell press.
The
Reset Button
is a breaker. It will pop out when there is an overload of electricity. Press
it in to reset.
The
Power switch
must be set to the on position and the
Cord
must be plugged in before
pressing.
