USC SEED 16 Series, Operator'S Manual

Page: 10 / 124

Page 10
Seed Series 16 & 20 Conveyor
TRANSPORT SAFETY
1.
Read and understand ALL the information in the Operator’s Manuals regarding
procedures and SAFETY when moving or transporting the Conveyor.
2. Check with local authorities regarding Conveyor transport on public roads. Obey all
applicable laws and regulations.
3. Always travel at a safe speed. Use caution when making corners or meeting traffic.
4. Make sure the SMV (Slow Moving Vehicle) emblem
and all the lights and reflectors that are required by
the local highway and transport authorities are in
place, are clean and can be seen clearly by all
overtaking and oncoming traffic.
5. Do not allow riders on the Conveyor or the towing
vehicle when transporting.
6. Attach Conveyor to towing vehicle with a pin and
retainer.
7. Lower Conveyor to its lowest position for
transporting. Keep lift point at drawbar height.
8. Keep to the right and yield the right-of-way to allow
faster traffic to pass. Drive on the road shoulder, if
permitted by law.
9. Do not exceed 25 m.p.h. (40 km/h). Reduce speed
on rough roads and surfaces.
10. Stay away from overhead obstructions and power
lines when transporting. Electrocution can occur
without direct contact.
11. Always use hazard warning flashers on tractor when
transporting unless prohibited by law.
PLACEMENT SAFETY
1. Move only with the appropriate equipment
2. Stay away from overhead power lines when moving the Conveyor. Electrocution
can occur without direct contact.
3. Be familiar with machine hazard area. If anyone enters hazard areas, shut down
machine immediately. Clear the area before restarting.
4. Operate the Conveyor on level ground free of debris. Anchor the Conveyor to
prevent tipping or upending.