-
Page 5
Programmable System Options:
The following is a description of the programming options. Some program branches control more
than one option, and may require accessing a particular branch number twice in order to program
all desired features.
1.
Arm Mode:
Selects one of two modes: Manual Arming (with remote only) or Passive Arming
(arms 30 seconds after key is turned off and all doors closed.
2.
Auto Rearming Mode:
When selected, the system will automatically re-arm and lock 30
seconds after it has been disarmed regardless if a door is open or closed.
3.
Ignition Controlled Lock/ Override Code Set:
This dual program branch sets Ignition
Controlled Locking and programs the optional Emergency Override Code.
Override Code Set. Changes the Emergency Override Code for a higher level of security.
4.
Ignition Controlled Unlocking:
Selects whether or not the system automatically unlocks the
door when the ignition is turned off. The Ignition Door Locking feature may be programmed
to unlock all doors or the driver's door only. If driver's door only is selected, the optional
Passenger Unlock feature must be connected.
5.
Door Unlock Pulse:
Selects between one pulse or two pulse operation for the door unlock
output. Vehicles that require two pulses on the proper wire to unlock the doors can be
interfaced directly without the use of relays or any additional circuitry by programming the
system for double unlock pulse.
6.
Door Lock Pulse Length:
Selects between a 1, 3 or 0.1 seconds output for door locking and
unlocking. Program to 3 seconds for vehicles equipped with vacuum door locking systems.
7.
Passive Door Locking:
Selects whether or not the system will automatically lock the doors
during Passive Arming.
8.
Ignore Open Door Report:
Bypasses the open zone warning chirps for vehicles equipped
with a residual dome light circuit that remains ON for a period of time after closing the door.
9.
Arming Chirps/Honks:
Selects between normal and silent operation.
10.
Horn Honk with Arm & Disarm:
Enables or Disables Arm/Disarm horn honk
confirmation.
Disabled:
When selected, the horn will honk only when the alarm is triggered.
Enabled:
When selected, the horn will provide the arm/disarmed trigger indications,
allowing the siren installation to be skipped.
11.
Horn Honk Duration
:
Selects between Short, Normal or Extended horn honks.
12.
Extended Parking Lights:
When selected, the parking lights will remain ON for 30 seconds
after disarming the system.
13.
Aux 2 Auto Activate with Arm:
When selected, the Auxiliary 2 output will activate when
the system is armed. This feature can be used to roll-up windows, close sunroofs, activate
accessories, etc.
Summary of Contents for AS62UG
Page 1: ...AS62UG INSTALLERS INSTRUCTIONS ...
Page 10: ...AS62UG Not Used ...