![background image](http://html1.mh-extra.com/html/usag/1612-a/1612-a_instruction-manual_1063922004.webp)
SMALTIMENTO DI QUESTO PRODOTTO
Egregio Cliente,
Quando sarà giunto il momento di gettare questo prodotto, La preghiamo di ricor-
dare che molti dei suoi componenti sono costituiti da materiali di valore che pos-
sono essere riciclati. La preghiamo pertanto di non gettarlo nella normale immon-
dizia, ma di informarsi presso le autorità competenti locali in merito alle strutture di
riciclaggio presenti nella sua zona.
EN INTRODUCTION
Normally, when you disconnect a car’s
storage battery for replacement, the car’s
on-board computer will be turned off and
the relevant data and personal settings
(such as radio station setting, clock set-
ting, etc) will be lost. The car data saver
can be used to keep your car’s computer
powered while you replace car’s storage
battery. It is a useful tool for car service
personnel.
INSTRUCTION
Black Output Clip and Red Output Clip:
The red output clip is to be connected to
the car’s connecting terminal which the positive terminal of the car’s storage battery is connected
to, while the black output clip is to be connected to the car’s connecting terminal which the negative
terminal of the car’s storage battery is connected to.
Black Input Clip and Red Input Clip:
According to requirement of the vehicle, you should prepare a 12V or 24V storage battery, which is to
be used as a temporary power supply for the car. The red input clip is to be connected to the positive
terminal of this storage battery and the black input clip is to be connected to the negative terminal
of this storage battery.
OPERATING INSTRUCTION
1. Connect the red output clip to the car’s connecting terminal which the positive terminal of the car’s
storage battery is connected to, and connect the black output clip to the car’s connecting terminal
which the negative terminal of the car’s storage battery is connected to. The green LED 1 of the car
data saver lights up.
2. Connect the red input clip to the positive terminal of the storage battery to be used as a temporary
LED 1
LED 2
LED 3
Red Output Clip
Red Input Clip
Black Input Clip
Black Output Clip