I
NDUSTRIES
, I
NC
.
I
NDUSTRIES
, I
NC
.
Since 1982
GripSafe Patents:
US – 9,927,058, 9,810,364 | CA – 3,004,787 | European Registration – 00626264-0001
Other US and Foreign Patents Pending
www.USAIndustries.com | (713) 941-3797
©2019, USA Industries, Inc.
FRM-23.1 Rev.B
5. Preparing the GripSafe DBB Plug for Installation
5.1 The GripSafe DBB should be in the “Ready to Install” position from the factory.
Figure 3:
GripSafe Plug and Pipe Concentricity
Page
10
of
24
If the pipe ID is within 0.200” of the max
ID Range, a 1/8” concentricity alignment
between the plug OD and the pipe ID must
be maintained to obtain the max pressure
rating.
Figure 4:
“Not Ready to Install” State (Retracted)
Figure 5:
“Ready to Install” State (Energized)
