14
Visit us online at www.USWaterSystems.com Give us a call at: 1
-
800
-
608
-
8792
Installation Instructions
6. Turn the bypass handle to place the unit in the bypass position. Slowly turn on the main
water supply. At the nearest cold treated faucet or spigot, open the faucet and let water run
a few minutes or until the system is free of any air or foreign material resulting from the
plumbing work. If a faucet is used, make sure the screen is removed first.
7. Make sure there are no leaks in the plumbing system before proceeding. Close the water
tap when water runs clean. Check for leaks again.
8. Proceed to programming then to the start up instructions.
Note:
The unit is not ready for service until you complete the start
-
up instructions.
Be Sure to program the unit first.
Handle
Pointer
Summary of Contents for Flexx Oxi-Gen FX-150
Page 27: ...27 Power Head Exploded View...
Page 29: ...29 Control Valve Exploded View...
Page 31: ...31 Tank Assembly Parts List...
