23
System Backwash
9.
Allow the system to backwash for 10 minutes. Close the main water source.
10.
Allow the system to stop flowing from the backwash whip hose.
11.
Disconnect the inlet connection from the outlet/regeneration manifold (C) on the system.
12.
Remove the backwash whip hose.
13.
Rotate the system 180 degrees and connect the inlet plumbing to the inlet manifold (A) and the connect
the outlet plumbing to the outlet/regeneration manifold (C).
14.
Perform a Regeneration procedure starting at Step 2.
NOTE: A Regeneration procedure should performed after every backwash cycle.
