9
Softener Preparation
3) Place a piece of duct tape over the riser tube so no resin enters the riser while filling.
4) Use the Blue Funnel provided, to pour the softening resin into the tank. Pour it evenly
around the hole to ensure it is well distributed in the tank and pour slow enough, to keep
from plugging the hole. A helper may be needed to hold the funnel during the filling pro-
cess. It is recommended that a dust mask and safety goggles be worn to prevent possible
injury. Pour all the resin sent with the system in the tank. US Water does not ship “extra”
resin.
5) When the resin is installed move tank side to side to settle the media. Remove the fun-
nel and tape from the distributor tube.
