3
* Pellet size may effect the actual rate of fuel feed and burn times. Fuel feed rates may vary by as much as 20%. Use PFI
listed fuel for best results.
FUEL CONSIDERATIONS
Your pellet stove is designed to burn premium hardwood pellets that comply with Association of Pellet Fuel Industries
standards. (Minimum of 40 lbs density per cubic ft, 1/4” to 5/16” diameter, length no greater than 1.5”, not less than 8,200
BTU/lb, moisture under 8% by weight, ash under 1% by weight, and salt under 300 parts per million). Pellets that are soft,
contain excessive amounts of loose sawdust, have been, or are wet, will result in reduced performance.
Store your pellets in a dry place. DO NOT store the fuel within the installation clearances of the unit or within the space
required for refuelling and ash removal. Doing so could result in a house fire.
Do not over fire or use volatile fuels or combustibles, doing so may cause a personal and property damage hazards.
SAFETY AND EPA COMPLIANCE
Your pellet stove has been approved for installation in the USA and Canada. It may also be installed in a manufactured
or mobile home. Your stove is Certified to ASTM E 1509-12, and Certified to ULC S627-00, and(UM) 84-HUD.
Electrical Specifications
Electrical Rating
110-120 volts ac, 60 HZ, 3.0 Amps
Watts (operational)
125
Watts (igniter running)
310
Dimensions
Height
30.125” (76.5cm)
Width
18.5” (47mm)
Depth
20.375” (51.75mm)
Weight
128lbs
Flue Size
3” or 4”
Heating Specifications
Fuel Burn Rate* (lowest setting)
1.5 lbs./hr. (0.7 kg/hr)
Burn Time (lowest setting)
13 hrs. (approximate)
Hopper Capacity
20 lbs. (9.1kg)
Flue Size
3” or 4”
Specifications
WARNING:
It is against federal regulations to operate this wood heater in a manner inconsistent with the
operating instructions in the owner’s manual.
Summary of Contents for Ashley AP5710
Page 30: ...Notes...
