DiscountCarStereo.com
4-2 SELECTING iPod MODE ON THE CHRYSLER RADIO
Press the “MODE” or “CD-C” button repeatedly until “CD 1-x” appears on the display (x is the track
number for the “Now Playing” song on iPod). This display confirms that iPod mode has been
completely synchronized and active. Synchronization timing varies according to the number of
playlist on your iPod. If the iPod was playing previous to turning the Radio’s ACC power OFF, and
the iPod was not disconnected, playback resumes from where it stopped.
4-3 DISCONNECTING THE iPod FROM THE INTERFACE
If the iPod is disconnected during playback in iPod mode, the radio will automatically switch to
AM/FM mode. After disconnecting, wait until the iPod screen changes from the External Control
Mode screen back to the normal menu before attempting to reconnect to the interface.
Tip: If you press and hold the PLAY/PAUSE button on the iPod, you may get the normal iPod menu
back
faster.
4-4 PLAYING SONGS ON THE iPod
All audio tracks on your iPod will be played (All Play) at DISC 6 if the AUX option is not selected.
Track order is determined by the default order on your iPod. Selecting DISC 1 to DISC 5 on radio will
allow playback of 5 playlist on the iPod. Please refer to “Playlist naming” in this manual for more
information regarding available and unavailable playlist. Every time the iPod is connected to the
interface, playback begins at the “Now Playing” song at DISC 6 by default.
If the iPod was playing any of its playlist right before connection, the same playlist will continue to
play and repeated at DISC 6 and the iPod switches to “ALL” when the
FF (
►►
)
button is pressed.
4-5 SELECTING A PLAYLIST
Press DISC UP (
Λ
) or DISC DOWN (V) button to select a playlist. The selected playlist will begin
playing and the playlist number and track number will be displayed. In rare cases, this may take up
to a few seconds to complete synchronization. After playing the last song in the current playlist,
playback will start again from the first track on this playlist.
4-6 PLAYLIST NAMING
Once the iPod™ or iPod™ mini
is
connected to your CHRYSLER radio via the PA11-CHR,
the iPod interface scans all available playlist on the iPod and looks for designated “CHR”
playlist which are created for direct access with the DISC buttons on the Chrysler radio.
The designated "CHR" playlist relate to the DISC number in the following manner:
Preset #’s
Playlist(s) names
DISC1 CHR1
DISC2 CHR2
DISC3 CHR3
DISC4 CHR4
DISC5 CHR5
DISC6
ALL SONGS on iPod
Naming a playlist in iTunes™ for your CHRYSLER iPod interface must be exactly as shown. “CHR”
must be in
capital letters
and there can be
no spaces
between “CHR” text and the “DISC”
number. However,
you may add any text after the correct name and number has been
assigned. The following is an example of correct playlist naming with additional text:
DISC1
CHR1_Love
DISC2
CHR2_Discount
DISC3
CHR3_Car
DISC4 CHR4_Stereo
DISC5 CHR5_Service
