9
1:2U = 1-2 Upshift
This setting is used to adjust the full-throttle shift RPM for the 1-2 upshift. The
RPM value is displayed in thousands (e.g. 5.25 = 5250 RPM). If you are in doubt,
start on the low side. Press the knob once to enter the adjustment mode and
change this setting. (Press once again to return to the menu.)
2:3U = 2-3 Upshift
This setting is used to adjust the full-throttle shift RPM for the 2-3 upshift. The
RPM value is displayed in thousands (e.g. 5.25 = 5250 RPM). If you are in doubt,
start on the low side. Press the knob once to enter the adjustment mode and
change this setting. (Press once again to return to the menu.)
3:4U = 3-4 Upshift
This setting is used to adjust the full-throttle shift RPM for the 3-4 upshift. The
RPM value is displayed in thousands (e.g. 5.25 = 5250 RPM). If you are in doubt,
start on the low side. Press the knob once to enter the adjustment mode and
change this setting. (Press once again to return to the menu.)
LtU = Light Throttle Upshift
This setting is used to adjust the light-throttle shift RPM for all shifts. The value
shown is the approximate closed-throttle RPM for the 2-3 upshift and is displayed
in thousands (e.g. 1.32 = 1320 RPM). The 1-2 and 3-4 shifts are scaled
proportionally with the 2-3 shift RPM as it is changed. Press the knob once to
enter adjustment mode and change the setting. (Press again to return to the
menu.) As the shift points are modified at either light or full throttle, the values in
between are automatically scaled proportionally. The light throttle RPM
adjustment has the greatest effect at closed throttle and the influence of this
adjustment diminishes to zero as you approach wide-open throttle. The reverse is
true for the full-throttle RPM adjustments.
tCC = Torque Converter Clutch
This setting is the transmission input shaft RPM (1.70 = 1700 RPM) at which the
torque converter clutch will engage (providing that all other conditions for
engagement are met). Press the knob once to enter the adjustment mode to
change this setting. (Press again to return to the menu.)