5
PrS = Commanded Line Pressure
Indicates the transmission line pressure that the controller is currently
commanding in PSI. These values are based upon the normal OEM parameters
for the pressure control solenoid and main regulator valve line-up for the selected
transmission. The actual line pressure may vary from this value, especially if
changes have been made to the main pressure regulator valve, the main
regulator valve spring, the main regulator boost valve, or the pressure control
(EPC) solenoid.
tbL = Table
Shows the currently selected table (TB1, TB2, TB3, or TB4) after showing "TbL"
for 2.5 seconds. Pressing the knob once displays "SLT" for 2.5 seconds to show
that the table can be manually selected. In select mode, you can rotate the knob
to select "rES", "tb1", “tb2”, “tb3”, “tb4”. rES stands for "Remote Select" and
indicates that the table is selected remotely by the table select input. Remote
Select mode is the power-on default. You can select tables 1-4 to override the
table select input and force the Quick 4 to use a specific table. Once you have
selected the desired table or mode, you can exit select mode by pressing the
knob once. "rET" will then be displayed for 2.5 seconds to indicate that you have
returned from select mode. The selected mode will be retained until the ignition is
turned off or until you change it.
tnE = Tuning Mode
Allows the most commonly-used settings (such as TPS calibration and shift
points) to be adjusted directly on the controller. Press the knob once to enter
Tuning Mode. Please see the “Tuning Menu Options” section for the details of the
tuning mode menu. Upon entering tuning mode, a copy of the currently-selected
table is created to be used as a “scratchpad” for editing, and the controller begins
running off of this copy during the tuning session. This allows you to see the
effects of your changes immediately, which eliminates guess-work. We refer to
this functionality as "Live Editing". Another benefit of live editing is that the original
calibration is preserved until you explicitly save your changes. This allows safe
experimentation without modifying any of your existing settings. If you don't like
the results of your changes, simply exit the tuning menu with the Discard (dIS)
option or turn off the ignition. This will erase your changes and reset everything
back to where it was before you entered tuning mode.
SrE = Software Revision
Indicates the software and hardware revision of the controller.
"MajorRev.MinorRev.HardwareRev" (ie: 4.0.3)