US Shift 4L60E, Installation And Operation Manual

Page: 28 / 40

28
SHIFTWARE
Introduction
In most cases, the Quick 4’s built-in tuning menu will allow users to make all the
modifications they’ll need without connecting to a PC. However, using the
Shiftware software allows you to modify the way your Quick 4 Transmission
Control System behaves in greater detail. You can customize shift-points and
advanced settings, monitor the Quick 4 in real-time, record detailed logs, and
diagnose errors.
Setup
To create a calibration for the Quick 4, it is best to start with one of the standard
calibrations which are included with the software. To load a standard
configuration for your transmission, click the
Open button on the toolbar,
then browse to the folder where the transmission calibration files are located.
(Default location is C:\Shiftware\) The files are named according to the
transmission and RPM range and have the .btc file extension. Choose the
calibration file and click
Open .
Once the calibration file is loaded, click the System Settings button on the
toolbar to check the settings and make sure that they are correct for your
transmission. The System Settings window has several tabs within it. Click each
one to see each section of settings specific for your transmission.
The System Settings Window