VSG - 10
6
Operation
Use a hammer to remove the diamond
segments
Step 1
Push down on the handle to lift the
head off the ground and gently tip the
machine back and lay it down
Step 2
Step 3
Turn off the machine and disconnect it
from the power source
THE FOLLOWING SYMBOLS AND DEFINITIONS ARE FOUND THROUGHOUT THIS
MANUAL AND ARE DESIGNED TO MAKE YOU AWARE OF POTENTIAL HAZARDS OR
UNSAFE PRACTICES.
A potentially hazardous situation exists which, if not
avoided, could result in death or serious injury.
A potentially hazardous situation exists which, if not
avoided, may result in minor or moderate injury or
property damage.
A potentially hazardous situation exists which, if not
avoided, may result in product or property damage.
THE FOLLOWING SYMBOLS & LABELS MAY BE FOUND IN THIS MANUAL OR ON THE TOOL.
Read the operator’s manual carefully and understand the
contents before you use this equipment.
Always wear a protective helmet
WARNING
IMPORTANT
CAUTION
Always wear protective glasses or full face protection
Always wear hearing protection
Always use ground fault protection
Always wear breathing protection
Be sure to read the entire owners manual carefully and completely and make sure you
understand the instructions before using the machine.
This machine is designed for surface removal of glues, adhesive residues, putty and
similar materials from concrete floors; as well as grinding and levelling concrete floors.
THE FOLLOWING SYMBOLS AND DEFINITIONS ARE FOUND THROUGHOUT THIS
MANUAL AND ARE DESIGNED TO MAKE YOU AWARE OF POTENTIAL HAZARDS OR
UNSAFE PRACTICES.
A potentially hazardous situation exists which, if not
avoided, could result in death or serious injury.
A potentially hazardous situation exists which, if not
avoided, may result in minor or moderate injury or
property damage.
A potentially hazardous situation exists which, if not
avoided, may result in product or property damage.
THE FOLLOWING SYMBOLS & LABELS MAY BE FOUND IN THIS MANUAL OR ON THE TOOL.
Read the operator’s manual carefully and understand the
contents before you use this equipment.
Always wear a protective helmet
WARNING
IMPORTANT
CAUTION
Always wear protective glasses or full face protection
Always wear hearing protection
Always use ground fault protection
Always wear breathing protection
Operating this machine without the appropriate training may cause serious personal
injury and or monetary damages.
Installing the diamonds
Always wear gloves when changing
or removing diamonds, they may
become very hot during use.
Step 4
Once the diamond segments have
been attached, carefully stand the
machine back up - listening for
segments falling off
Step 5
Insert new diamonds into the slots
and lightly tap diamond inserts with
a hammer towards the outside of the
plate
Full Set
Half Set
Optional
Standard
