VSG - 10
10
Maintenance
If used and cleaned correctly this is an extremely low-maintenance machine
Cleaning
Always clean the machine at the end of a work day.
Do not use a pressure washer to clean this machine.
Keep the cooling air vents clean and clear to insure that the machine is cooling
correctly.
Check the rubber grinding plate coupler pads every month and replace if necessary
Grinding Plate Coupler Pads
Electrical Feed
Check that the cord ,and any extension cords used,are intact and in good working
condition.
Never use the machine if the cord is damaged. Use an authorized service technician
for repair.
Shroud
Make sure that the shroud is intact, clean, and that it seals to the floor.
Replace damaged shroud as needed.
THE FOLLOWING SYMBOLS AND DEFINITIONS ARE FOUND THROUGHOUT THIS
MANUAL AND ARE DESIGNED TO MAKE YOU AWARE OF POTENTIAL HAZARDS OR
UNSAFE PRACTICES.
A potentially hazardous situation exists which, if not
avoided, could result in death or serious injury.
A potentially hazardous situation exists which, if not
avoided, may result in minor or moderate injury or
property damage.
A potentially hazardous situation exists which, if not
avoided, may result in product or property damage.
THE FOLLOWING SYMBOLS & LABELS MAY BE FOUND IN THIS MANUAL OR ON THE TOOL.
Read the operator’s manual carefully and understand the
contents before you use this equipment.
Always wear a protective helmet
WARNING
IMPORTANT
CAUTION
Always wear protective glasses or full face protection
Always wear hearing protection
Always use ground fault protection
Always wear breathing protection
Never use damaged cables
THE FOLLOWING SYMBOLS AND DEFINITIONS ARE FOUND THROUGHOUT THIS
MANUAL AND ARE DESIGNED TO MAKE YOU AWARE OF POTENTIAL HAZARDS OR
UNSAFE PRACTICES.
A potentially hazardous situation exists which, if not
avoided, could result in death or serious injury.
A potentially hazardous situation exists which, if not
avoided, may result in minor or moderate injury or
property damage.
A potentially hazardous situation exists which, if not
avoided, may result in product or property damage.
THE FOLLOWING SYMBOLS & LABELS MAY BE FOUND IN THIS MANUAL OR ON THE TOOL.
Read the operator’s manual carefully and understand the
contents before you use this equipment.
Always wear a protective helmet
WARNING
IMPORTANT
CAUTION
Always wear protective glasses or full face protection
Always wear hearing protection
Always use ground fault protection
Always wear breathing protection
Always unplug the machine before beginning any cleaning or
maintenance.
