US Robotics USR5420 User Manual Download Page 30

 

 

 

 

Contents: 

About the 802.11g 
Wireless USB Adapter 

 

Network Configuration 
and Planning 

 

Adapter Installation 
and Configuration for 
Windows 
98SE/2000/Me/XP 

 

Navigating the 
Wireless Configuration 
Utility

 

Troubleshooting

 

Glossary

 

Product Specifications 
for 802.11g Wireless 
USB Adapter 

 

U.S. Robotics 
Corporation Limited 
Warranty > 

Regulatory Information

 

802.11g Wireless USB Adapter User Guide 

 

U.S. Robotics Corporation Two (2) Year 
Limited Warranty 

1.0 GENERAL TERMS: 
1.1 This Limited Warranty is extended only to the original end-user purchaser 
(CUSTOMER) and is not transferable. 
1.2 No agent, reseller, or business partner of U.S. Robotics Corporation (U.S. 
ROBOTICS) is authorised to modify the terms of this Limited Warranty on behalf of 
U.S. ROBOTICS.  
1.3 This Limited Warranty expressly excludes any product that has not been 
purchased as new from U.S. ROBOTICS or its authorised reseller. 
1.4 This Limited Warranty is only applicable in the country or territory where the 
product is intended for use (As indicated by the Product Model Number and any local 
telecommunication approval stickers affixed to the product). 
1.5 U.S. ROBOTICS warrants to the CUSTOMER that this product will be free from 
defects in workmanship and materials, under normal use and service, for TWO (2) 
YEARS from the date of purchase from U.S. ROBOTICS or its authorised reseller. 
1.6 U.S. ROBOTICS sole obligation under this warranty shall be, at U.S. ROBOTICS 
sole discretion, to repair the defective product or part with new or reconditioned 
parts; or to exchange the defective product or part with a new or reconditioned 
product or part that is the same or similar; or if neither of the two foregoing options is 
reasonably available, U.S. ROBOTICS may, at its sole discretion, provide a refund to 
the CUSTOMER not to exceed the latest published U.S. ROBOTICS recommended 
retail purchase price of the product, less any applicable service fees. All products or 
parts that are exchanged for replacement will become the property of U.S. 
ROBOTICS. 
1.7 U.S. ROBOTICS warrants any replacement product or part for NINETY (90) 
DAYS from the date the product or part is shipped to Customer. 
1.8 U.S. ROBOTICS makes no warranty or representation that this product will meet 
CUSTOMER requirements or work in combination with any hardware or software 
products provided by third parties. 
1.9 U.S. ROBOTICS makes no warranty or representation that the operation of the 
software products provided with this product will be uninterrupted or error free, or 
that all defects in software products will be corrected. 
1.10 U.S. ROBOTICS shall not be responsible for any software or other CUSTOMER 
data or information contained in or stored on this product. 
2.0 CUSTOMER OBLIGATIONS 
2.1 CUSTOMER assumes full responsibility that this product meets CUSTOMER 
specifications and requirements. 
2.2 CUSTOMER is specifically advised to make a backup copy of all software 
provided with this product. 
2.3 CUSTOMER assumes full responsibility to properly install and configure this 
product and to ensure proper installation, configuration, operation and compatibility 
with the operating environment in which this product is to function. 
2.4 CUSTOMER must furnish U.S. ROBOTICS a dated Proof of Purchase (copy of 
original purchase receipt from U.S. ROBOTICS or its authorised reseller) for any 
warranty claims to be authorised. 
3.0 OBTAINING WARRANTY SERVICE: 
3.1 CUSTOMER must contact U.S. ROBOTICS Technical Support or an authorised 
U.S. ROBOTICS Service Centre within the applicable warranty period to obtain 
warranty service authorisation. 
3.2 Customer must provide Product Model Number, Product Serial Number and 
dated Proof of Purchase (copy of original purchase receipt from U.S. ROBOTICS or 
its authorised reseller) to obtain warranty service authorisation. 
3.3 For information on how to contact U.S. ROBOTICS Technical Support or an 
authorised U.S. ROBOTICS Service Centre, please see the U.S ROBOTICS 
corporate Web site at: www.usr.com 

Summary of Contents for USR5420




































Reviews: