Connect the 22 Mbps Wireless
Access Point
•
Use the Ethernet port and an RJ-45 cable to connect the 22 Mbps Wireless
Access Point to one of the following devices: a cable or DSL modem with
routing capabilities, a hub, a bridge, an existing Ethernet LAN, or a router.
•
Attach the power supply to the Wireless Access Point and to a power
outlet.
The Wireless Access Point has three LED status indicators, LINK, DATA, and
POWER. When the Wireless Access Point is plugged in, the PWR LED will
illuminate. When a network connection is established, the LINK LED will be
green. When there is network activity, the DATA LED will be yellow.
