Note:
Be sure to find out what letter your CD-ROM drive uses before you
begin installing your new product. You will need to know this to properly
install your software.
Install your software
Attention:
You will need to install this software on all the PCs or
laptops you plan to wirelessly network together.
Insert your U.S. Robotics Installation CD-ROM into your CD-ROM drive.
Note:
If the Choose Setup Language window appears, select your
preferred language and click
OK
.
Note:
If your CD-ROM does not automatically launch, click Windows
Start
,
Run
, and type
D:\setup
(or the appropriate letter of your CD-
ROM drive) and click
OK
.
Some files will be copied to your system, and then you will be asked to read the
license agreement. Read the agreement and click
Yes
.
The Installation CD Graphic User Interface (GUI) will appear on your screen.
Click
Software
.
Click
Install Access Point Software
. Follow the on-screen instructions and wait
for some files to be copied to your hard drive. A window will appear showing
you the files that are being loaded onto your system. When you are prompted to
reboot your computer, select
Yes, I want to restart my computer now
and click
Finish
. After your computer reboots, the program window with the Configura-
tion Utility icons may appear. Close this window. When the Menu screen of the
U.S. Robotics Installation CD-ROM returns, close it.
Remove the Installation CD-ROM and prepare to install your hardware.
