US Robotics Courier V.34 User Manual Download Page 128

Page: 128 / 245

COURIER HIGH SPEED MODEMS

C-6 Alphabetical Command Summary

Inquiry

Display product code

Display results from ROM checksum

Display results from RAM test

Display the duration of the last call

Display current modem settings

Display NVRAM settings

Display Dial diagnostics summary of the last call

Display product configuration information

Reserved

I10

Display dial security account status information

I11

Reserved

Modem clock operation: Call-duration or Real-time mode.
Displayed with ATI3 and ATI6 commands.

Display current call-duration if online. Display
last call-duration if offline. Default.

Return actual time at ATI3. Clock is set using
ATI3=HH:MM:SS K1.

Speaker volume control (internal modems only)

Low

Medium (default)

High

NOTE: External modems will return an OK message to this
command, but the volume will not change. The volume button
must be used to alter volume.

Summary of Contents for Courier V.34






















































































































































































































































Search results

Summary of Contents for Courier V.34

Reviews:

Related manuals for Courier V.34

Brands by name

Popular brands

US Robotics Courier V.34, User Manual

Search results

Summary of Contents for Courier V.34

Reviews:

Related manuals for Courier V.34

Brands by name

Popular brands