2
2
prompts to complete the installation. If you are asked for the location of your CD-
ROM drive, type the letter of your CD-ROM drive and a colon (D: if your drive
letter is D).
If you have Windows Me:
Turn your computer on. After you see a message that your new modem has been
detected and installed, insert your Installation CD-ROM into your CD-ROM drive.
Click
Start
, select
Settings
, then click
Control Panel
. Click
View all Control Panel
Options
in the upper-left corner of your screen. Double-click the
System
icon.
Click
Device Manager
. Expand
Modems
by clicking
+
. Double-click the
description of your new modem, then click the Driver tab. Click
Update Driver
.
Select
Specify the location of the driver (Advanced)
. Click
Next
. Select
Removable media
. Click
Next
. Select
U.S. Robotics 56K Message V.92
. Click
Next
. Click
Finish
to complete the installation. Click
Close
on the U.S. Robotics
56K Message V.92 screen. Windows will now detect the Wave Device for Voice
Modem. Select
Specify the location of the driver (Advanced)
. Click
Next
. Select
Removable media
. Click
Next
. Select
U.S. Robotics Half-Duplex Audio Device
.
Click
Next
. Click
Finish
to complete the installation.
If you have Windows NT:
Windows NT users must be in administrator mode to properly add any
new hardware.
Turn your computer on. Insert your Installation CD-ROM into your CD-ROM drive
before you log in. Click
Start
, point to
Settings
, and click
Control Panel
. Double-
click
Modems
. When the Install New Modem screen appears, click
Next
to have
Windows detect your new modem. When your modem is detected, click
Change
.
Click
Have Disk
. Make sure the location of your CD-ROM drive is selected. Click
OK
. Select
U.S. Robotics
. Select
U.S. Robotics 56K Message V.92 (non-PnP)
.
Click
OK
and then
Next
. Click
Finish
. The Modems Properties tab will display the
COM port that is assigned to your modem. Click
Close
. If the System Settings
Change window appears, click
Yes
to restart your computer.
If you have Windows 2000:
Windows 2000 users must be in administrator mode to properly add any
new hardware. Your modem will be automatically installed. Follow the
update driver procedure below.
Turn your computer on. After you see a message that your new modem has been
installed, insert your Installation CD-ROM into your CD-ROM drive. Click
Start
,
select
Settings
, then click
Control Panel
. Double-click the
System
icon. Click the
Hardware tab. Click
Device Manager
. Expand
Modems
by clicking
+
. Double-
