Wireless Nd1 PC Card and PCI Adapter
1. Ensure that an Ethernet cable is connected between your router's WAN port and
the cable/DSL modem's Ethernet port and that the corresponding LEDs are lit.
2. Ensure that your cable/DSL modem is connected to your wall jack. (A cable
modem uses a coax cable, and a DSL modem uses an RJ-11 cable.)
3. Restart your cable/DSL modem. (There may be a power switch or reset button
on the modem or you may have to unplug/re-plug the modem's power adapter.
Consult your modem's documentation.)
4. Reboot your router
5. After the router reboots and the LEDs on the router have stabilized, if you still
cannot access the Internet, please start at the beginning of this tutorial to
determine if there is a new point of failure. It's possible that your wireless
connection needs to be re-established.
6. If the router still does not have an IP address after repeating this tutorial, the
problem may be with the cable/DSL modem or your ISP. Please contact your
ISP's Customer Support.
Return to Troubleshooting page
© 2005-2006 U.S. Robotics Corporation
file:///G|/CSO/T-Writer%20Repository/Networking/5419%20Mach-1%20PCI%20Adapter/User%20Guide/trouble2.html (4 of 4)9/7/2006 9:29:42 AM
Summary of Contents for 5412
Page 64: ......
