CatMouse MultiPet
Operation & Installation
12
6) Mounting your CatMouse MultiPet:
Option #1: Wall Mounting
Keyhole Mounting
Drill or punch two 3/16” holes, 7”
apart in desired mounting location.
Press anchors firmly into holes (fig.
5a). Turn in the screws leaving approx.
1/4” of each screw extending from the
wall. Mount by placing the keyholes
located at the back of the CatMouse
MultiPet over the screws (fig. 5b).
Option #2: Surface Mounting
Repositionable Mounting Strips
Separate opposing repositionable
mounting strips. Remove adhesive
backing paper from one side and
attach to desired location. Remove
adhesive backing paper from other
side and attach to the CatMouse
MultiPet. Secure unit to desired
location (fig. 6).
IMPOrTANT NOTE: Oxyions are heavier
than air and migrate downward, thus it is
recommended to place the CatMouse
MultiPet higher than the objects or area
you are deodorizing and sanitizing.
fig. 6
fig. 5a
fig. 5b
NOTE:
Units being mounted on the wall require use of the units Keyhole
Mounting method. Units being mounted on surfaces as in moving
vehicles require Repositionable Mounting Strips method.
Wall Mounting
Surface Mounting
Summary of Contents for CatMouse
Page 23: ......
