fig. 2
fig. 3
fig. 4
fig. 1
1) Select a power source:
Option #1: 120VAC Power Adapter
Plug 120VAC Power low-voltage safety Adapter
into wall outlet.
Option #2: 12VDC Vehicle Adapter
Plug 12VDC Vehicle Adapter into 12VDC power
source.
2) Connect the other end of the cord into the jack of
the unit, located on the right side (fig. 1).
3) locate the ON/OFF button on the left side of the
unit. Press the “ON/OFF” button once (fig. 2).The
red leD power indicator will light up indicating the
unit is activated and ready to operate.
4) To adjust level of odor elimination, locate the
“leVel” button to the left of the “ON/OFF” button.
•
HI
:
Push the “leVel” button once and
wait for green light to illuminate (fig. 3).
This will emit the maximum amount of
Oxyions for maximum odor control on a
continuous basis.
•
LOW
:
Push “leVel” button again and
wait for the yellow light to illuminate
(fig. 4). This will emit an intermittent
amount of Oxyions, approximately three
minutes on/two minutes off, for moderate
odor control.
5) Press the “ON/OFF” button again to turn off the
unit.
CatMouse MultiPet
Operation & Installation
11
DANGER:
Keep away from water sources
including rain, bathtubs, sinks and pools.
Summary of Contents for CatMouse
Page 23: ......
