AC REGEN 10
Approximate Weight: 450 Lbs. [204 Kgs]
Notes:
-
Top and bottom endplates are removable to gain access inside the drive and to punch holes for conduits.
-
Endplates must be removed from the drive before drilling and punching holes to avoid metal dust inside the drive enclosure. Failure to
do so will cause damage to the drive.
-
For through-panel mounting, customer is to seal for gap on all side of cutout. Provided by customer, aluminum angle 1” x 1” x 0.050”
can be used to attach to all sides of drive to help seal and secure the drive.
-
Size 3 enclosure can also be free-standing with optional floor stand kit from US Drives, Inc.
Figure 2-2b
AC Regen Mounting Information:
Size 3 (Nema Type 1)
Summary of Contents for AC Regen
Page 1: ...AC LINE REGENERATIVE MODULE 15 HP TO 1750 HP INSTRUCTION MANUAL ...
Page 13: ...AC REGEN 11 Figure 3 Size 1 Only Recommended Power Wiring ...
Page 14: ...AC REGEN 12 Figure 3 3a Size 2 3 Recommended Power Wiring ...
Page 15: ...AC REGEN 13 Figure 3 3b Size 1 2 3 AC Regen Connection in a Common Bus System ...
