USB 9640 5-Channel LED PAR
© US Blaster Europe BV
When dipswitch #10 is set at ON, the fixture works in DMX mode. By various combining the
Dipswitches #1 to #9 you can set the address ranging from 1 to 512.
At this moment, the fixtures can be controlled by DMX controller or another fixture that has been
designated as Auto or Sound Active mode with 5 channels receiving the data controlling the Red,
Green, Blue, brightness and strobe rate output of the fixture respectively.
Note:
The address encoded by combining dipswitches #1 to #9 function as initial channel address.
DMX channel and function chart
Channel Value
Function
CH1
0~255
Adjust CH1 value 0~255 and brightness of red LED is 0~100%
CH2
0~255
Adjust CH2 value 0~255 and brightness of green LED is
0~100%
CH3
0~255
Adjust CH3 value 0~255 and brightness of blue LED is 0~100%
CH4
0~255
Adjust CH4 value 0~255 and brightness of all LEDS is 0~100%
0~10
No strobe
CH5
11~255
Adjust CH5 value 11~255 and all LEDS strobe.
Strobe speed is from slowest to fastest.
Master/slave mode
Set switch 10 of slaves ON and switch 10 of master OFF, it is in MASTER/SLAVE mode and they
can run at the same time. Master mode has three working ways: auto with fade, auto without fade
and sound. You can choose program via switch 1~3 and choose auto speed via switch 4~6 in
auto mode.
