The URTON M2 is a Large-Diaphragm-Tube-Microphone with switchable pat-
terns. It is manufactured with utmost care to produce it´s distinctive, warm
and brilliant sound. Handling high sound levels without annoying distortions
is yet another outstanding attribute. The URTON M2 is one high precision
instrument helping to create the special sound. Thus it demands special care
in handling. The URTON M2 uses a twin capsule with platinum diaphragms of
only 4μm gauge. The capsules are mounted on a shock absorber to prevent
subsonic distortions. An additional screen protects against moisture from
spittle occuring regularely during speech and singing performance. The tube
used is a highly selected pentode in a zero feedback circuit design. The output
transformer is specially designed and made for the URTON M2, it provides
even highest levels undistorted to the fully floating output.
Each URTON M2 is completely precision handcrafted in Germany by enthusi-
asts delivering utmost reliability, safety and audio performance, and sure it
meets all CE reg. Requirements -all parts have been specially selected by
URTON to do so. Exchanging any parts will NOT lead to a better performance,
so leave the electronics of your URTON M2 untouched.
Special tools are needed for opening a URTON M2. In case of failure please
contact your national distributor or Analog Audio GmbH.
How to use your M2:
The mains line at power supply is set to 120 Volts for the US market normally,
and to 240 Volts for other countries. This should be shown at the nameplate.
Please verify the setting matching your local mainsvoltage. If changing of
mains voltage is needed (230 or 115 are selectable) please follow instructions
of extra instruction sheet. All condenser microphones are sensitive to humidi-
ty. In case your M2 goes from cold to warm environment, please let it sit open
and unconnected for 24 hrs in the new environment.
Summary of Contents for M2
Page 1: ...2 M A N U A L ...
