URTON microphones: Power Supply
The power supplies of all URTON microphones are identical. The URTON
power supply is carefully handcrafted meeting all CE specs and designed for
most possible safety, reliability and audio performance as well.
All components are choosen by URTON for this special purpose, there is no
need for the user to improve any characteristics by exchanging parts. Please
leave the power supply like it is, it will not get better.
Mains:
In standard configuration the power supply will be deliverd in 240 Volt set-
ting. To change to 120 Volt please follow these steps:
After necessary work is accomplished put together the whole power supply in
reverse order by using all of the parts. Fasten plastic nut of power indicator
hand-tíght but firm and power switch by using the inside hex nut. Make sure
no loose cables, parts or screws are left inside the housing, and nothing is left
over.
Do not re-connect power cord and mains before case is fully closed and
screwed and all steps of this manual are double-checked.
Before opening the housing disconnect power cord and mains from power
supply.
Unscrew 6 screws of housing by using a proper fitting quality screw driver
(metric no 3 or 4). Use of cheap and improper tools will lead to ugly screw
heads and worn out srew slots.
Summary of Contents for M2
Page 1: ...2 M A N U A L ...
