Urrea SI910 User Manual And Warranty Download Page 28

28

SI910

Urrea Herramientas Profesionales S.A. de C.V. 

Warranties this product for a period of 1 year in 

its parts, components and manual labour against 

any manufacture defect from the purchasing date. 

Purchase date: ____/____/____

Product:____________________

Brand:______________________

Model:______________________

______________________________

Distributor seal and signature

Sold and Imported by:

Urrea Herramientas Profesionales S.A. de C.V. 

km 11,5 Carretera A El Castillo, El Salto, Jalis-

co, México. C. P. 45680, Tel. (33) 3208 7900, 

RFC UHP900402Q29

Terms:

In order to make warranty effective you must pres-

ent the product along with the warranty properly 

fillled and signed to an authorized distributor or 

service center. 

Urrea Herramientas Profesionales S.A. de C.V. 

will cover the transportation cost related to the 

warranty.

This warranty is not applicable in the follow-

ing cases:

· When the product has not been used according 

to normal conditions or natural wear of its parts. 

· When the product has not been used according 

with this user’s manual instructions. 

· When the product has been fixed or modified by 

unauthorized or unqualified person. 

Urrea Herramientas Profesionales S.A. de C.V. 

garantiza este producto por el termino de 1 año 

en sus piezas, componentes y mano de obra con-

tra cualquier defecto de fabricación a partir de la 

fecha de entrega. 

Fecha de venta: ____/____/____

Producto: ___________________

Marca: ______________________

Modelo: ____________________

______________________________

Sello y firma de distribuidor

Comercializado e Importado por:

Urrea Herramientas Profesionales S.A. de C.V. 

km 11,5 Carretera A El Castillo, El Salto, Ja-

lisco, México. C. P. 45680, Tel. (33) 3208 7900, 

RFC UHP900402Q29

Condiciones:

Para hacer efectiva la garantía deberá presentar 

el producto junto con la póliza de garantía debi-

damente firmada y sellada por el establecimiento 

donde la adquirió, en cualquiera de los centros de 

servicio autorizados. 

Los gastos de transportación que se deriven del 

cumplimiento de la garantía serán cubiertos por:

Urrea Herramientas Profesionales S.A. de C.V. 

Esta garantía no será valida en los siguientes 

casos:

· Cuando el producto haya sido utilizado en condi-

ciones distintas a las normales o al desgaste natu-

ral de sus partes. 

· Cuando el producto no haya sido operado de 

acuerdo al instructivo de uso que lo acompaña. 

· Cuando el producto haya sido alterado o repara-

do por personas no autorizadas. 

E S P A Ñ O L

POLIZA DE GARANTÍA

E N G L I S H

WARRANT POLICY

SI910 manual.indd   28

09/06/16   12:28 p.m.

Summary of Contents for SI910





























Reviews: