6
−−−−
sec.2b
K-STEEL CALL MODULE
BIBUS 2
nd
Ed. VOP - Technical Manual
Ref.
072/
4
K-STEEL CALLING MODULE WITH REPERT
ORY
6. Fasten the module holder frame to the flush mounting boxes by
means of the specific hinged attachment.
7. Fit the seal and close the frame.
K-STEEL CALLING MODULE WITH REPERTORY Ref. 072/4
INSTALLATION
The holes in the upper part must only be used for introducing the
cables if overlapped to other boxes.
2. Flush the box and the required height considering the direction
and the indications provided for video systems.
Warning
: During installation, protect all parts which will be
exposed to view from mortar, plaster and cement.
Never use abrasive detergents to clean units.
3. Fit the flush mounting box in line with the wall: it must not
project.
The wall surface on which the front rests must be as smooth as
possible (max. tolerance 1.5 mm).
4. If the internal production has been removed from the box for any
reason, insert it as shown in the figure. Fix it in the upper part not
used for fixing the module holder frame.
IMPORTANT
: the warranty conditions will be forfeited if the
protection is either not installed or installed incorrectly.
5. For fitting, loosen the two tap screws and remove the crossbar
from the embedding box frame. Fit the modules in the frame.
§
§
max.
6 mm
n° 4 M4 x 16 mm
X
7
4
1
0
8
5
2
9
6
3
A
B
C
n° 7 M3
