9
DS1060-162A
Frequency bands:
............................................................................................................................13,56 MHz
Output power (Max):
.............................................................................................................-1 dBµA/m @ 3m
Power voltage and consumption on terminals V+ e V-
Power voltage:
...............................................................................................................................44 – 57 Vdc
Max. consumption (video call) @48 V:
.................................................................................................200 mA
Max. consumption (stand-by) @48 V:
....................................................................................................80 mA
Relay contact range C, NC, NO:
Maximum switching voltage:
.................................................................................................................... 30 V
Maximum switching current:
...................................................................................................................3,5 A
Maximum switching load:
............................................................................................................. 40 VA 25 W
Garage gate relay contact range (SE2):
Maximum switching voltage:
.................................................................................................................... 30 V
Maximum switching current:
...............................................................................................................200 mA
Max. distance from hall button:
.............................................25 m with cable cross-section area 0.5 mm
2
Max. distance from open door sensor:
.................................50 m with cable cross-section area 1.5 mm
2
Max. distance from supplementary power supply:
.............100 m with cable cross-section area 1.5 mm
2
Max. distance from capacitance lock:
................................100 m with cable cross-section area 1.5 mm
2
7. KEY TO SYMBOLS
Symbol
Description
Direct input voltage
See the installation manual of the device
8. SIMPLIFIED EU DECLARATION OF CONFORMITY
Hereby, URMET S.p.A. declares that the radio equipment type:
ELEKTA STEEL IP CALL MODULE WITH MIFARE PLUS Ref. 1060/23
is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet address:
www.urmet.com