DS1092-229
10
5
OPERATION AT POWER-UP
The camera employs the default settings the first time it is switched on. Changes to the settings will be permanently
stored and will be made available the next time the camera is switched on. You can return to the default settings by
means of the appropriate menu option at any time.
The camera will work as follows when it is switched on.
1. The camera will run a calibration procedure and a message showing the following information will appear on the
video output OSD (On Screen Display): protocol, communication parameters, camera address and software
version.
EASY DOME 1092/679
CAMERA: CTU20AM108
ADDRESS: 1
BAUDRATE: 2400
PROTOCOL: AUTO
VERSION: 1.0
S/N: 064501
INITIALIZING
Settings as configured on FUNCTION PROGRAM
→
MOTION
→
POWER ON ACTION menu. This mode
remains unchanged until a different command is given from the keyboard. For instance, in this phase the
camera can point at fixed point or scan the visibility area. For further details please refer to menu POWER ON
ACTION detailed description.
5.1
HOW TO USE THE CONTROL KEYPAD REF. 1092/621 - 1092/693
The camera is ready to receive commands from the control keypads Ref. 1092/621 - 1092/693 (see figure below) after
calibration.
1092/621 control keypad
