8
−−−−
sec.4b
2 VOICE - Technical Manual
DOOR PHONE APARTMENT STATIONS
To save the programming, remember to exit from the same
by pressing the
button for more then 5 seconds; in any
case, after 10 minutes the device exists the programming
state and saves the parameters changed.
9
. Green LED under the
button
On steady:
call in progress
On blinking:
conversation ongoing
10
. Green LED under the
button
On steady:
possibility of a door opening
INSTALLATION
WITH FLUSH-MOUNTED CASING MOD. 503
To install door phone perform the following operations:
Install
fl
ush-mounting box at the height indicated.
Fix the bracket to the mounting box.
Box Mod. 503
Metal
bracket
(*)
1,55 m
n° 2 M3,5 x 19 mm
included
Connect the door phone
Fix the door phone to the bracket
1
2
WITH FLUSH-MOUNTED CASING Ø 60MM
Install
fl
ush-mounting box at the height indicated.
Remove the plastic base from the door phone unit and
fi
x the
base to the wall as shown in the drawing here below
1,55 m
n° 1 2,9 x 13 mm
countersunk screw
Box Ø 60 mm
n° 1 screw and screw
anchor included
(*)
Connect the door phone
Fix the door phone to its plastic base
1
•
•
•
•
•
•
•
•
WALL SURFACE MOUNTING
Remove the plastic base from the door phone unit and
fi
x the base to
the wall as shown in the drawing here below.
n° 2 screws and screw
anchors included
1,55 m
(*)
Connect the door phone
Fix the door phone to its plastic base
1
DISTANCE BETWEEN HOLES
UP
83,5 mm
Cable crossing area
(*)
For disabled or special needs users of the D1 type (elderly), D2
type (lower limb motor dif
fi
culties) or D3 type (upper limb motor
dif
fi
culties),
the centre of the device
must be arranged at a
height comprised between 110 cm and 130 cm with respect to the
fl
oor. For more details, see technical standard CEI 64-21:2016-12
– Residential environments. Systems suited for use by people with
disabilities or special needs.
TECHNICAL CHARACTERISTICS
Power supply voltage: ......................................................
36 – 48 Vdc
Max. current consumption: in operation ...........................
70 mA max
in
standby:
.......................................
3 mA max
Operating temperature: ...............................................
-5 °C ÷ +45 °C
Max. humidity: ........................................................................
90% UR
Dimensions (WxHxD): .............................................
110 x 80 x 18 mm
CLEANING
You can clean the door phone by rubbing it gently with a damp
cloth.
•
•
2VOICE HAND-FREE DOOR PHONE Ref. 1183/7
INSTALLATION - TECHNICAL CHARACTERISTICS
Ref. 1183/7
2VOICE COMFORT DOOR PHONE
