urmet domus 1093/040S, Quick Manual, Page: 42 / 84

DS1093-028 42
2.4.1 PASSWORD CHANGE
Use “ ◄► ” to shift the “active frame” onto the “
Password
” box, press “
Edit
” and enter a new password.
The password is a maximum 16 number combination. To enter the sequence of numbers in a password, use the number keys on
the front of the panel (press “
Edit
” to cancel a character). The entered numbers will be replaced by a “*” symbol on the screen for
privacy.
After entering the password, press “
Enter
” to quit entry mode.
Use “ ◄► ” to shift the “active frame” onto the “
Verify
” box, press “
Edit
” and enter the new password.
The password will be saved and become effective if the two passwords are the same.
An error message will appear indicating the fault if the entered password and the check password are different.
Figure 31: password error message
In this case, press “
Enter
” to go back to the previous menu and repeat the entry procedure.
e
IMPORTANT NOTE
•
Only numeric passwords if new users are programmed in local mode (i.e. using the front panel of the DVR).
Alphanumeric passwords may be created using the software.
•
It will not be possible to access the device in local mode (i.e. using the front panel) if an alphanumeric
password is chosen.
•
For safety reasons, the password is case-sensitive.
3 DVR FUNCTIONS
3.1 MAIN/AUXILIARY MONITOR MANAGEMENT
The Urmet Domus Ref.1093/040S device is provided with two independent video outputs:
¾
MAIN
¾
spot-auxiliary (AUX)
They can be used to manage both the main monitor (identified on the state bar by the letter “ M ”) and the auxiliary monitor
(identified by the letter “ A ”).
Press the “
MAIN/AUX
” button on the front panel of the device to select the video output, and consequently the corresponding
monitor.
The “
9
” symbol on the state bar indicates the selected monitor and the “ × ” symbol indicates the monitor which is not in use.
Figure 32: main monitor selected
Figure 33: auxiliary monitor not used
Full control of the device (menu access, search and start recordings, etc.) is possible on the main monitor.
The “
MENU ” and “ REC ” buttons are not available on the auxiliary monitor.