
DS1093-028
34
2.1.1
DISPLAY MENU BASIC SETTINGS
2.1.1.1 Language
Use “
▲▼
” to select the language in this menu.
2.1.1.2 Device
ID
This option can be used to assign an address to the DVR for controlling it with a remote control.
Define a different address for each device if several DVRs are installed, otherwise the remote control will control all DVRs with the
same address at the same time.
The default address is “
01
”.
Use keys 0
÷
9 on the front panel to edit the device ID address.
The address must be from 1
÷
255.
2.1.1.3 Require
password
This option can be used to enable or disenable password request for the following functions:
¾
Menu
This function enables/disenables password request when the configuration menu is accessed.
¾
Power off (with the
button)
This function is used to enable/disenable password request for direct DVR switch-off.
¾
PLAYBACK
This function enables/disenables password request when playback is started/stopped.
¾
RECORDING
This function enables/disenables password request when recording is started/stopped.
¾
PTZ
This function enables/disenables password request when the PTZ menu is accessed.
Press “
ENTER
” or “
EDIT
” to enable or disenable the password.
Symbol “
9
” indicates that a password is required; symbol “
×
” indicates that a password is not required.
In case of psw request, the login window shown in the following figure will appear.
Figure 24: login page
The box contains a list of the default users. The features of the default administrator are:
¾
User
→
admin
¾
password
→
12345
The “admin” user name cannot be edited. The password can be edited.
Press “
◄►
” to point the cursor to “
Password
” and then use the number keys on the front panel to enter the default password.
Now, press “
ENTER
” twice to confirm and access the menu.
A sequence of three beeps lasting for approximately 3 seconds will be heard if the entered password is not correct. In this case,
press “
MENU
” and enter the password again.
e
IMPORTANT NOTE
•
THE DEFAULT PASSWORD IS “12345”.
•
It is advisable to change the default password to prevent intrusions.
•
Do not lose or forget the programmed password.
•
Take note of the new password and keep it in a safe place.
•
It will not be possible to access the device in local mode (i.e. using the front panel) if an alphanumeric
password is chosen (using the dedicated software).
2.1.1.4 Screen
saver
This option can be used to set the OSD (On Screen Display) display time.
Use “
▲▼
” to select.
Possible selections: “
1min
”, “
2min
”, “
5min
”, “
10 min
”, “
20 min
”, “
30 min
” and “
never
” (OSD is always shown – press “
ESC
” to
quit the menu).
2.1.1.5 Video
standard
This option can be used to select the video format. Use “
▲▼
” to select. Possible selections are “
NTSC
” and “
PAL
”.
2.1.1.6 Enable
scaler
This function allows to adapt the DVR video output display to the screen being used. Furthermore, by enabling this function, the
DVR automatically switches the resolution from 704x576 to 640x576 for PAL video systems and from 704x480 to 640x480 for
NTSC video systems. This function may be useful if some types of traditional CCTV monitors are used (CRT).
Press “
ENTER
” or “
EDIT
” to enable or disenable the password.
Symbol “
9
” indicates that the selected option is enabled; symbol “
×
” indicates that it is not.
Summary of Contents for 1093/040S
Page 82: ...DS1093 028 82...
Page 83: ...DS1093 028 83...